Overview

SaunaOnLine

Your own sauna at home...

Your sauna at home:

Zelfbouw Ideas:

Take a look at the picture beside and you'll have an idea on how a sauna is made of.
To begin you have to build a frame.
This frame is made of beams.
The second step is to insulate those frames by adding an isolation with a vapor-screen on the internal side of the cabin.
(the distance in between these frames is the width of the insulation).
The insulation has to be at least 6 cm. thick.
On the frames which have been fixed against a wall you onlyneed to place the internal Sauna-wood finishing; on the visible side's on the outside you decide which external finishing to apply (f.i. wood or tiles).
Concerning the roof-part:
You build a similar frame as for the walls, on the inner side you apply the same Polar Pine wood as applied on the walls.
In between the frames you put the insulation with the vapor-screen on the internal side of the cabin.
The insulation has to be at least 6 cm. thick.
On the upper side of the roof you put at least a fine board (this in function of the possible charges).

The Abashi bench-shelves can be delivered in 2 dim's; 2,05 m and 2,5 m you have to adjust them to the right lenght.
The Abashi shelves are fixed on a frame, inside this frame you put some reinforcements (each 40-50 cms) in order to reduce the Abashi-wood to bend.
This frame will be fixed inbetween 2 saunawalls,for the finishing touch you put an Abashi shelf on the front (visual) part of the frame. For a cornerbench, you have to fixe up the 2 bench in between the 1 bench and a 3 saunawall.
The 1 bench is fixed at about 45 cm. above the floorlevel; the 2 bench (eventually a corner-bench) is fixed at about 45 cm. above the level of the 1 bench.

You have to foresee a tube in the wall (in between the insulation) this to guide the electrical cable to the sauna-heater eventually via the external command-plate.
The power of the sauna-heater is determined by the internal volume of the cabin and is calculated:1 m = about 1 Kw (in function of the insulation).
For a power consumption until 3 Kw a 230V monophase connection is OK for the others a 3-phase connection is required.
Attention! Every electrical connection has to be made by a certified electrician.

Our expo-cabin can only be visited after appointment!!!


Ref. Product Price VAT Incl
W1 Polar Pine / m 23,50 €
W2 Hemlock / m 51,00 €
W3 Cedar / m 67,00 €
B1 Abashi bench-wood (6 X 22X95X2000mm.) 56,00 €
B2 Abashi bench-wood (6 X 22X95X2500mm.) 70,00 €
D2 Glass door (73 X 190) 400,00 €
IR2 Infra-Red-Set with 2 Lamps (short wave)
965,00 €
IR3 Infra-Red-Set with 3 Lamps (short wave) 1147,00 €
IR4 Infra-Red-Set with 4 Lamps (short wave) 1365,00 €
IR5 Infra-Red-Set with 5 Lamps (short wave) 1473,00 €
IRL Separate Infra-Red-Lamp (short wave) 228,00 €
FC1
external command 295,00 €
F21
Oven 4.5 Kw / 400 V without command 234,00 €
F22
Oven 4.5 Kw / 2*230 V with internal command 238,00 €
F23
Oven 4.5 Kw / 400 V with external command 587,00 €
F31
Oven 6.0 Kw / 400 V without command 235,00 €
F32
Oven 6.0 Kw / 400 V with internal command 238,00 €
F33
Oven 6.0 Kw / 400 V with external command 593,00 €
F41
Oven 8.0 Kw / 400 V without command 242,00 €
F42
Oven 8.0 Kw / 400 V with internal command 242,00 €
F43
Oven 8.0 Kw / 400 V with external command 600,00 €
F51
Oven 9.0 Kw / 400 V without command 247,00 €
F52
Oven 9.0 Kw / 400 V with internal command 251,00 €
F53
Oven 9.0 Kw / 400 V with external command 605,00 €
F61
Combi-Oven 6.0 Kw / 400 V with external command (man) 1403,00 €
F62
Combi-Oven 8.0 Kw / 400 V with external command (man) 1416,00 €
A1 Wooden bucket with insert and spoon
79,00 €
A2 thermo/hygrometer Luxe 58,00 €
A3 Set Inox bucket + spoon + thermo/hygrometer 112,00 €
A4 Lampshade 41,00 €
A5 Saunalight 19,00 €
A6 Air ventilation 25,00 €
A9 Headrest Abashi 12,00 €
A10 Timer Luxe 27,00 €
A11 Aromatic: vaporator to fixabove the oven
52,00 €
A12 Isolation sheets / m
5,00 €

For an order of > 750,00 €(VATincl.) the delivery at home is included (whole Belgium),
if not an additional 30,00 € will be charged as transportfee (whole Belgium).

For additional information,
please contact us on following number +/32/(0)477/33.60.17
or via creaqua@mail.com

As order-confirmation 33% of the invoice has to be payed in advance.
You have to count 2 to 3 weeks of delivery-delay after receipt of your advance-payment.


Creaqua bvba
Antwerpsesteenweg 190
B-2660 Hoboken
Tel.:+32/(0)477/33.60.17
BeoBank BE15 1096 6769 8630

Creaqua

RETURN

Valid HTML 4.01 Transitional